How to make a face garland at home

Pick photos, let the site cut out every face, print the cards and hang them on string. Every step of a face banner you make at home.

Start here

Print and hangUpdated November 6, 2026

A hand holds a paper cutout of a smiling baby in a party hat with a red bow, in front of more baby face cards in party hats

A face garland, often called a face banner, is a row of paper cards on a string. Each card holds one face of the person you celebrate. To make one at home, you pick 10 to 20 photos, let the site cut out each face, print the PDF at actual size on card stock, cut along the lines and clip the cards to a string. Building and viewing the garland is free. You pay once when you download the file.

We are Artur and Victoria, and we make this site. We made our first face garland for the birthday of our daughter Alisa: 12 cutout cards with party hats, printed at home on card stock. It took about 20 minutes from the first photo to the wall.

What you need

  • 10 to 20 photos of one person. One photo is enough for one card.
  • A phone or a computer with a current browser.
  • A printer and paper: Letter in the US and Canada, A4 elsewhere. Matte card stock holds its shape best. No printer? A copy shop prints the same file.
  • Scissors or a craft knife.
  • String or ribbon, and glue, tape or small clips.

You do not need a hole punch, and you do not need any design app.

Three ways to make a face banner

You can make a face banner by hand, with a few apps, or on this site. All three work. They differ in where your time goes.

Three ways to make a face banner at home
WayWhat you doWhere the time goes
By handPrint the photos, then cut out each head with scissorsCutting every head along the hair. The edges and the sizes come out uneven
Several appsCut the head in one app, add a hat in another, lay out the sheet yourselfMoving each photo between apps, and making the heads the same size by eye
This siteAdd the photos. The site cuts and sizes each head and lays the cards out for your paperCutting the printed cards. The site made our 12 cards in about 2 minutes. Cutting took most of our 20 minutes

The hand way needs no file at all. It is a good choice for 3 or 4 cards, or when you enjoy the craft.

Pick the photos

Choose photos where the face is large, sharp and lit from the front. A face that fills a good part of the photo prints sharper on a large card.

Leave some space around the head. A head at the very edge of the photo comes out cut on the card, and the site does not add the missing part.

The site makes a card for the largest face on each photo. On a group photo you mark the other people yourself, because a garland is almost always about one person. A photo with no face, such as a child seen from the back or the family dog, still gives a card from the middle of the photo.

Photos from different years work well for a big birthday. People often take one photo for each year of a child, or one for each decade.

Tip

A photo sent through WhatsApp or Telegram is made smaller on the way. Ask for the photo as a document or a file. A screenshot of a photo is small too, so add the photo itself.

Let the site cut out the faces

Open the editor and add all your photos at once. The site finds the head on each photo and cuts it out along its edge. The cards come one by one, so you can open a ready card before the others are done.

The site also sizes each head by its face. So every head on the garland comes out the same size, even when the photos were taken from near and far.

Is a cut wrong somewhere, for example a lost ponytail or a piece of a chair next to the head? Open the card and fix the edge with your finger or the mouse. Did the site take the wrong head, such as the adult who holds the baby? Move the mark to the right face.

Choose the look

Pick one shape for the whole garland:

The three card shapes
ShapeWhat it showsParty hat
CutoutOnly the head, cut along its edge, with a thick borderYes
FrameA square of the photo in a borderNo
PolaroidA square photo with a wide bottom edge, like an instant photoNo

On a cutout you can add a party hat. Choose One for all, and one hat goes on every head at once. Choose Different for each, and every card gets its own hat. Pick the color of the border to fit your wall. You see the whole garland before you pay anything.

Make your photo garland

Free to build and see. You pay once, for the PDF.

On the print screen, pick the paper and the card size. The slider goes from 40 mm, about 1.5 inches, up to nearly a full sheet: about 10 inches on Letter. It opens at the largest size where every photo prints sharp. The screen then shows how many sheets you need and how long the string must be.

For a sense of scale: a frame or polaroid card of 90 mm, about 3.5 inches, fits 4 to a sheet on both A4 and Letter. A cutout can come out wider than a square, and the screen counts that for you.

If a photo is too small for the size you picked, the screen marks that card as soft. Make the cards smaller, or replace the marked photo.

If the site asks how you want your garland, pick the PDF. Then pay, download the file and print it with these settings:

  • Scale: 100% or Actual size. Never Fit to page. A printer that scales the page makes every card smaller.
  • Paper type: Cardstock or Matte. Quality: High.
  • Paper: matte card stock, 65 lb cover (about 176 gsm). Most home printers take it. Plain paper works too, but the cards curl.

Print one sheet first and check it. Then print the rest.

At a copy shop, bring the PDF and ask for matte card stock, 80 to 100 lb cover, printed at actual size.

Cut and hang the face banner

Cut each card along its line. Plan the most time for this step: it took us most of our 20 minutes. Scissors are fine for the frame and the polaroid. A cutout has a curved edge, so take your time around the hair and the ears. A craft knife helps in tight places.

A card has no tab and no hole. Lay the cards out on the table in order first. The order you set in the editor is the order on the paper. Then glue, tape or clip each card to the string, with a small gap between the cards.

Cut the string to the length the print screen showed, and add a little at each end to tie it. Removable wall hooks or painter's tape hold the ends without marks on the wall.

Download the PDF before you clean your browser

Download the PDF as soon as the garland is ready. The garland lives only in your browser on this device. There is no account and no cloud copy. A private window or a browser clean-up erases it at once, and Safari can erase a site's data after about a week with no visit. So build the garland on the device you will print from. Your purchase is kept apart, by your email, so you never pay twice.

Questions about face banners

Is a face banner the same as a face garland?

Yes. In the US most people say face banner. Face garland means the same thing, and some sellers call it photo bunting. All three mean a row of face cards on a string.

Do my photos go to your server?

No. Your browser does all the work on your photos. To check it, turn on airplane mode once the first card is ready. The rest of the garland still gets built.

Can I make it on my phone?

Yes. The whole path works in a phone browser. On an iPhone the PDF goes to the Files app, and you print it from there.

How long does it take?

Our garland of 12 cards took about 20 minutes. The site made the cards in about 2 minutes. Almost all the rest was cutting the paper.

Who is this not for?

You print the file yourself, at home or at a copy shop. If you want a ready garland in the mail, this way is not for you.